RG-103HOTB

Tinpec USB 2.0 converter for IDE/SATA Hard Disks with OTB

• to connect easy SATA or IDE harddisks with the USB interface of the PC,with One-Touch-Backup
• suitable for 2.5“ & 3.5“ harddisks
• USB 2.0 and 1.1 compatible
• for Windows 98SE, ME, 2000, XP, Vista
• incl. driver, power supply and cable

RG-E2022

Tinpec USB 2.0 To SATA or Esata Converter OTB
* USB 2.0 To SATA Or eSATA.
* Support One-Touch-Backup.
* Including OTB Software.
* Support high speed mode, up to 480Mbps/s.
* LED Indicate for working status.
* Driverless for Win2000/XP/Vista,MAC 9.6 or above.
* Super Slim design.

RG-E2021

Tinpec USB 2.0 To SATA or Esata Converter

* USB 2.0 To SATA Or eSATA.
* Support high speed mode, up to 480Mbps/s.
* LED Indicate for working status.
* Driverless for Win2000/XP/Vista,MAC 9.6 or above.
* Super Slim design.

RG-105

Tinpec USB TO RS232 Converter

* USB Specification Rev.1.1 compliant
* Support the RS232 Serial interface
* Over 1Mbps data transfer rate
* Support remote wake-up and power management

RG-A0423

Tinpec iPhone/iPod HUB USB 2.0

*Charger for iPhone/iPod from PC or Netbook.
*Data transfer between iPhone/iPod and PC.
*Data Synchronize between iPhone/iPod and PC.
* 3Port USB 2.0 HUB

RG-155

Tinpec USB TO PS/2 CONVERTER
-2 downstream PS/2 connector
-High power device on a current 500mA
-Bassed on USB
-Specification1.1 compatibility
-PS/2 keyboard and PS/2
-Mouse work together
-Under one adapter

RG-130H

Tinpec USB-to-Parallel(IEEE-1284) Converter
USB-to-Parallel(IEEE-1284) solution provides bi-directional connectivity between any standard IEEE-1284 compliant parallel port devices and the Universal Serial Bus (USB) interface. Software drivers for Microsoft Windows 98 are also provided to create a seamless migration path from traditional parallel port to the USB environment.

RG-120

Tinpec USB Printer Converter
Tinpec Printer adapter uses Prolific PL2503H it is Bus powered IEEE 1284 compliant Manages automatic negation for the fastest protocol available USB Printer Cable 5ft (1.8m) This item only works with Printers and will NOT provide a parallel port but an emulation port for Windows to use for Printing only! USB printing support is included in Microsoft® Windows® 2000, Windows Millennium Edition (Windows Me), and Windows XP and Vista.

RG-BT118


Tinpec Bluetooth v2.0+EDR Class 2 Ultra Mini USB Dongle

RG-BT128

Tinpec Bluetooth v2.0+EDR Class 2 Mini USB Dongle

RG-168T

Tinpec USB 2.0 Sound Card (TP6911B Chipset)
* Plug and play,
* USB 2.0
* Stereo 5.1-channel sound effects.
* Virtual speaker shifter.
* Speaker/headphone jack.
* Microphone jack.
* Transform analog sound signals to digital.

RG-168C

Tinpec USB 2.0 Sound Card (C-media Chipset)
* Plug and play,
* USB 2.0
* Stereo 5.1-channel sound effects.
* Virtual speaker shifter.
* Speaker/headphone jack.
* Microphone jack.
* Transform analog sound signals to digital.

RG-ST3506B

Tinpec IDE to SATA or SATA to IDE ADAPTER AUTO SWITCH
* Bidirectional.
* Serial ATA 1.0 Compatible.
* Automatically speedcontrol up to 1.5Gbps.
* ATA/ATAPI PIO Mode 0-4
* ATA/ATAPI Ultra DMA speed velocities(16.7,25,33,48,66,100,133 and 150MB/s)
* ATA/ATAPI LBA48 adressing-mode(2 Bytes per sector)
* Supports" Serial ATA Hot-Plug"
* MASTER and SLAVE model compatible.

RG-ST3506W

Tinpec IDE to TWO SATA or Two SATA to IDE ADAPTER AUTO SWITCH
Connect an IDE hard drive to a SATA controller
Serial ATA 1.0 compliant
Supports ATA 33/66/100/133 hard drives
Supports large capacity hard drives
Simple Plug and Play Installation
Compatible with any Serial ATA controller

RG-CF10

Tinpec IDE to CompactFlash adapter
Compatible with CompactFlash Type I/II and Microdrive memory cards
Connects to your motherboard IDE controller
40-pin IDE connector
Fully compatible with CFA (Compact Flash Association) Standard
PIO, Multi-word DMA and ULTRA DMA Host Data transfer support
Supports 8-bit/16-bit data transfer on host data
On board LEDs for power on and CompactFlash access
Voltage selection for +3.3V or +5V CompactFlash

RG-eCable
( Garmin eTrex GPS Data Cable )

Tinpec GPS single cable USB Converter ePlug
Currently under development and finishing test as specific Garmin type eCable that implemnent a serial to USB function. Each cable is approx 4 feet long and has an eTrex plug on one end and a USB A plug on the other. These cables will be able to power a GPS at the same time. All pins and plug contacts are gold plated. A software driver is on mini cd for all Windows variants.

RG-pCable
( Garmin II,II+, III, 12, 12XL, 45, 48, 72, 76 and others )

Tinpec GPS single cable USB Converter pPlug
Don't have a serial port on your PC or Laptop? Want to connect a GPS? Then these are what you need! Ideal for transferring data to and from your PC to a Garmin GPS. Suitable for IBM or compatible PC's or Apple PC's. Fully assembled, tested and ready to go. Complete with driver on CD or download latest version for Windows 2000/XP or Vista . Apple Drivers os 8.x and os 9.x or os 10.x

RG-epCable
( Garmin Geko, Emap, Etrex )

Tinpec GPS single cable USB Converter ePlug with 3.3v Power
Currently under development and finishing test as specific Garmin type eCable that implemnent a serial to USB function. Each cable is approx 4 feet long and has an eTrex plug on one end and a USB A plug on the other. These cables will be able to power a GPS at the same time. All pins and plug contacts are gold plated. A software driver is on mini cd for all Windows variants. The eplug type will power all 3.3v type GPS

RG-pPCable
( Garmin II,II+, III, 12, 12XL, 45, 48, 72, 76 and othe )

Tinpec GPS single cable USB Converter ePlug with 3.3v Power

RG-CLP pPlug Cable
( Garmin II,II+, III, 12, 12XL, 45, 48, 72, 76 and others )


Tinpec Car Power pPlug GPS cable